Shipping € 2,99 - Free shipping over € 65 Order before 12.00 - We ship today

DIY - this is how you exchange your old handels for leather handels

Lædergreb i italiensk kernelæder fra byRavn

This is how you simply exchange your old handels for new leather handels

After we moved into our new house, we started all sorts of do-it-yourself projects. Among other things, we renovated our hallway and painted the ceiling, walls, door frames and closet doors white and replaced the old handles on the closet doors with new black leather handles. In this guide we would like to show how easy it is to exchange the old handels for new leather handels.

DIY - skifte de gamle greb med nye lædergreb

Preparations before ordering the leather handles

Before the handles are ordered, you need to know the relevant dimensions. See points 1 and 2 for more information.

Once you have determined the dimensions, you can order the leather handles here.

Point 1: First measure the distance from center to center of the screw holes. In the photo below, the distance is 12.8 cm.

Sådan måles afstanden mellem hullerne til dine nye greb - byRavn

Item 2: Measure the thickness of the cabinet door/drawer.

Opmåling af skabslågens tykkelse - byRavn

Assembly of the leather handles

    When you receive your handels, you will find the following in the box:

    • Leather handles
    • screw for mounting

    To assemble the handles you need:

    • 2 screwdrivers
    • If there are already holes that match the handles, or if the holes have a diameter of less than 5 mm, a drill and a 5 mm drill bit are required.

    Pakkens indhold når du bestiller lædergreb - byRavn

    Step 3: Remove the old handles

    Point 4: Make sure that the diameter of the holes is large enough (5mm) so that the bolts and cylinders provided will fit the holes.

    If the holes are not large enough, you can use a 5mm drill bit to enlarge the holes.

    You can quickly tell if the holes are big enough by sticking the cylinder in one of the holes. See photos below.

    Montering af skure - byRavn

    Point 5: To mount the handles, put the screw through the hole in the handle and then put the screw in the hole on the front of the cabinet/drawer.

    Mount the handle with 2 screwdrivers. One screwdriver is used to hold the front screw in place so it doesn't turn when the back screw is tightened.

    Tighten the screws securely to ensure the handle is securely attached to the cabinet/drawer.

    Montering af lædergreb from by Ravn

    Ordering leather handles

    If you want to exchange your old handels for new leather handels, you will find our selection of leather handels on this page.




    Leave a comment

    Comments will be approved before showing up.

    Velkommen til byRavn

    Vi har lagt merke til at du besøker oss fra en norsk IP-adresse,
    og vi ønsker å gjøre deg oppmerksom på at vi også har et norsk nettsted.

    Gå til den norske nettbutikken

    Fortsett til den danske nettbutikken

    Välkommen till byRavn

    Vi har lagt märke till att du besöker oss från en svensk IP-adress,
    och vi vill göra dig uppmärksam på att vi även har en svensk hemsida.

    Gå till den svenska webbshopen

    Fortsätt till den danska webbshopen